20/60/100MHz Function Signal Generator High Precision Digital DDS Dualchannel Function Signal/Arbitrary Waveform Generator Pulse

101,28171,09

  • Model Number: Signal Generator
  • Display Size: 2.9 Inches & Under
  • DIY Supplies: Woodworking
  • Brand Name: meterk
  • Origin: Mainland China
  • Certification: NONE
  • Vertical Resolution: 14 bits
  • Waveform Length: 8192 points * 14bits
  • Minimum Pulse Width: 20ns
  • Display: 2.4 inch (320*240), TFT color display

————FY6900————-

Features:
Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals.
2.4 inch TFT color LCD with 320*240 resolution, simultaneously display parameters and graphics of CH1 and CH2.
Adopt MagicPulse Technology, Low Jitter(RMS)<200ps.
The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
Can output up to 99 groups of functions / arbitrary waveform, contains 35 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, CMOS(0~12V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, DC etc.
Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits; (The longer the waveform storage depth, the more detail the waveform is saved, and the signal details can be restored with high precision.)
Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.
Sweep Function: it can sweep 4 properties of signals including frequency, amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types; 0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions.
VCO Function (Voltage Control Output): can be achieved by an external input signal: voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage controlling duty cycle and PWM modulations.
Burst Output Function: there has Manual Trigger, internal CH2 Trigger, and External Trigger for your options. It can output 1~1048575 pulse trains.
Counter Function: it has 2 coupling measure modes including DC coupling and AC coupling. This design can solve inaccuracy problem of AC coupling.
Standard dual full functional channels which are equivalent to two independent generators.
Channel SYNC Function: support waveform copy and state copy between channels.
Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output, the phase between each channel can be adjusted.
Precisely adjust the phases of the two channels. Precision can be 0.01°.
Min amplitude resolution can be up to 1mV. Amplitude range is 1mV~24Vpp.
Duty-cycle of each channel can be adjusted independently 0.01%-99.99%, the adjusting resolution is 0.01%.
-12V~+12V DC Offset function. Resolution 0.001V.
Save Function: it can save 20 sets user-set parameters and can be loaded at any time.
Communicating Function: all functions can be controlled by PC program and the communication protocol is open for secondary development.
Output Short-circuit Protection: all channels can work more than 60 seconds when the load is short-circuited.
Provide powerful waveform editing PC software. Users can download arbitrary waveform to this instrument after edit through PC program which is included in user CD.
Adopt ABS plastic shell with table type design. Use 100-240V (AC) wide range voltage power supply.

Specification:
Plug & Model: EU Plug FY6900-20M / EU Plug FY6900-60M / EU Plug FY6900-100M / US Plug FY6900-20M / US Plug FY6900-60M / US Plug FY6900-100M / AU Plug FY6900-60M (Optional)
Material: ABS
Sine: 0~20MHz(20M), 0~60MHz(60M), 0~100MHz(100M)
Sampling Rate: 250MSa/s(20M,60M), 300MSa/s(100M)
Output Amplitude Range: 1mV~24Vpp(20M,60M), 1mV~25Vpp(100M)
Vertical Resolution: 14 bits
Waveform Length: 8192 points * 14bits
Minimum Pulse Width: 20ns
Modulation Type: AM, FM, PM, ASK, FSK, PSK
Display: 2.4 inch (320*240), TFT color display
Non-Volatile Storage: Can store 64 user-defined arbitrary waveforms, (8K 14bits) * 64
Power: AC100V~240V
Item Size: 210 * 195 * 75mm / 8.27 * 7.68 * 2.96in (L*W*H)
Item Weight: 611g / 21.56oz
Package Weight: 1065g / 37.51oz
Package Size: 27 * 21 * 9.5cm / 10.63 * 8.27 * 3.75in

Package List:
1 * DDS Signal Generator
1 * Power Cable
1 * USB Data Cable
1 * BNC-BNC Cable
2 * BNC-Clip Cable















———–ET3320C/ET3340C/ET3360C———

This two-channel arbitrary waves generator adopts direct digital frequency synthesis technology, which can output signals with high accuracy, stability and low distortion. 2.4-inch TFT LCD display, 320*240 resolution, with clear graphic interface. 200MSa/S sampling rate, 13bit vertical resolution and 8k storage depth. The measurement mode has 2 functions, one is a frequency meter (frequency measurement), the other is a counter (count the number of pulses). With four modulation modes of pulse/sweep/burst/modulated output. 5 basic waveforms and 32 arbitrary waveforms in-built. Support internal storage of 50 groups of user-defined edited waveforms.

Features:
Independent Channel:
Both channels are independent of each other and have phase synchronization function.
Basic Parameters: Sampling rate: 200MSa/S, vertical resolution: 13bit and storage depth: 8k.
Digital Display: 2.4-inch TFT LCD display, 320*240 resolution, with clear graphic interface.
Measurement Mode: The measurement mode has 2 functions, one is a frequency meter, the other is a counter. They measure digital signals from the external input port.
Frequency Meter: The frequency meter is used to measure the frequency. The frequency is measured by equal precise measurement. The coupling and gate time can be set.
Pulse Counter: With 100MHz high precise frequency meter and 32 bit counter. The counter is used to count the number of pulses, and can be set to turn on the coupling and function, as well as the number of zeroes.
Four Modulation Modes Design: Support for pulse/sweep/burst/modulated output.
System Settings: The system Settings page displays the current software version.It can load and save the system parameters, set the buzzer to open and close, the brightness of the screen, the English and Chinese language switching, and edit, save and load any wave, calibrate, and restore factory Settings.
Waveform Types: 5 basic waveforms(sinewave, squarewave, rampwave, pulsewave, noisewave) and 32 arbitrary waveforms in-built.
Waveform Storage: Support internal storage of 50 groups of user-defined edited waveforms.
Settable Time Edges: Pulsewave output set in edgestime.
AM/FM/PM Modulation Function: Internal AM, frequency modulation, PM modulation function (External AM, frequency modulation, PM modulation is optional).
ASK/FSK/PSK Modulation Function: Internal/external ASK, FSK, PSK modulation function.
60M Channel Output Frequency: Dual channel output, maximum output frequency 60M.
Waveform Output: Output of linear/logarithmic sweep and burst (pulse train) waveforms.
Standard USB Device Interface: Optional external analogue modulation interface.
Communication Extension Interface: The 10P communication extension interface of ET33C extends TTL digital signal and serial signal.
Software Support: Equipped with multifunctional arbitrary waveform editing software.
Three Models Available: ET3320C, ET3340C, ET3360C, the highest output frequency is 20MHz, 40MHz and 60MHz respectively.

Specifications:
Name: Waveform Generator
Material: plastics
Type: ET3320C 20MHz EU-Plug, ET3340C 40MHz EU-Plug, ET3360C 60MHz EU-Plug, ET3320C 20MHz USA-Plug, ET3340C 40MHz USA-Plug, ET3360C 60MHz USA-Plug (optional)

ET3320C:
Sinewaves: 1μHz-20MHz
Squarewaves: 1μHz-15MHz
Trianglewaves: 1μHz-15MHz
Pulsewaves: 100μHz-6MHz
Arbitrarywaves: 1μHz-6MHz

ET3340C:
Sinewaves: 1μHz-40MHz
Squarewaves: 1μΗz-15MHz
Trianglewaves: 1μHz-15MHz
Pulsewaves: 100μHz-6MHz
Arbitrarywaves: 1μHz-6MHz

ET3360C:
Sinewaves: 1μHz-60MHz
Squarewaves: 1μHz-15MHz
Trianglewaves: 1μHz-15MHz
Pulsewaves: 100μHz-6MHz
Arbitrarywaves: 1μHz-6MHz

Frequency Resolution: 1μHz
Frequency Accuracy: ±20ppm
Frequency Stability: ±1ppm/3 hour
Waveform Types: Sinewaves, squarewaves, trianglewaves, pulsewaves, noisewaves and arbitrary waves. There are 32 kinds of arbitrary waves and 50 kinds of user-defined waves.
Waveform Length: 8192 points
Waveform Sampling Rate: 200MSa/s
Waveform vertical resolution: 13bits
Item size: 210 * 200 * 85mm / 8.27 * 7.87 * 3.35in
Package size: 260 * 250 * 100mm / 10.24 * 9.84 * 3.94in
Package weight: 1100g / 2.43lb

Packing List:
1 * Waveform Generator
1 * Three-core Power Cable
2 * BNC Coaxial Cables
1 * USB Data Cable
1 * Straight Signal Cable













Many Questions about Dropshipping Services Are As Follows:

1.How many orders can you handle per day?
we are a large company in Shenzhen,China,with a large warehouse that can handle large orders everyday.We send out countless parcels everyday.We can guarantee the order you request.

2.How fast can you process orders?
We will arrange shipment as soon as possible after you pay the order.Priority delivery for dropshipping order

3.Could you ship order without any receipts,invoices and promotional offer inside the package?
Absolutely!No invoices,receipts,promotional offer if you leave notes on the order(if you want,we can provide.)

4.If you need other products?
We can provide most products you need as much as possible1

If you have any other questions,please feel free to contact us.
We are very grateful to cooperate with you.

5.We can support CSV/Excel File Dropshipping.

6.There is no limited stock to fulfill the orders on a daily basis

Reviews

There are no reviews yet.

Be the first to review “20/60/100MHz Function Signal Generator High Precision Digital DDS Dualchannel Function Signal/Arbitrary Waveform Generator Pulse”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

SKU: 1005005859292444 Categories: ,